Church & Univeristy Carillon Bell Products: Westminster Chimes, Church Bell Hymns



Welcome To The CompuChime Support Page




The following bell schedules may be downloaded and used with the CompuChime carillon system. These are typical schedules used by our customers and do not contain all schedule commands available in the CompuChime system. If you have a schedule and / or remote setup requirement, let us know. We will likely include your schedule requirements on this support page.


Note:
All file names must match those provided in the schedule. Files may be renamed if necessary.
Audio files must be placed in the correct directory (Chimes, Random, or Remote). Improper placement will cause undesired results.
The downloaded schedule file should be placed in the CompuChime directory unless otherwise specified.
Schedule Description:

* System is activated from 9:00 AM to 6:15 PM.

* Westminster chime at the top of each hour until deactivated.

* Bell strikes multiple times at the top of each hour to announce the time.

* Play two randomly selected carillons at 12:00 noon and 6:00 PM.

* Assign bell and carillon tunes to each key (1-12) on the remote control for various church activities:

Button# 1 = Call To Worship1
Button# 2 = Call To Worship2
Button# 3 = Call To Worship3
Button# 4 = Bell Peal1
Button# 5 = Bell Peal2
Button# 6 = Bugel Taps1
Button# 7 = Bugel Taps2
Button# 8 = Funeral Toll
Button# 9 = Bell Change Ringing
Button# 10 = Wedding Song1
Button# 11 = Wedding Song2
Button# 12 = Wedding Song3

Note:
This schedule will run every day unless a weekday or month/day schedule is found.

Schedule Description:

* System is activate from 9:00 AM to 10:00 AM.

* At 9:00 AM, a call to worship bell will ring for several minutes. The system will be silent for the remaining day.

* This schedule will run every sunday.

Note:
The call to worship may be activated by pressing key 1, 2 or 3 on the remote control. This is possible because the first 12 keys of the remote have been assigned various bell and carillon sounds. This remote setup is the same as "sched1.sch".

Schedule Description:

* System is activated at 12:00 noon.

* Westminster chime at 12:00 noon.

* Bell strikes 12 times to announce time.

* Play two randomly selected carillons at 12:00 noon.

* System is disabled after completing the above commands.
* System is activated again at 6:00 PM.
* Westminster chime at 6:00 PM.
* Bell strikes 6 times to announce time.
* Play two randomly selected carillons at 6:00 PM.
* System is disabled for the remaining evening.
* This schedule will run every monday.

Schedule Description:

* System is activate from 9:00 AM to 7:00 PM.

* Westminster chime every hour until disabled.

* A bell strike will announce the time every hour.

* Two carillons will be randomly selected from the system hard drive and played at 12:00 noon.

* At 6:00 PM, two consecutive tracks will be randomly selected from the systems compact disk and played.

Note:
A CD must be placed in the CD player before using this schedule.
This schedule will run every tuesday.
By substituting CD's, this schedule may be used for various holiday carillons or other music.

Schedule Description:

* System is active from 12:00 noon to 07:00 PM.

* At 12:00 noon, Hallelujah carillon will play.

* After the carillon, a peal of bells will ring for 5 minutes at 12:00 noon.

* At 06:00 PM, Joy To The World carillon will play.

* The system will be disabled and quiet for the remaining evening after 07:00 PM.

Note:
All audio files (Hallelujah, JoyToWorld and Peal2_5Min) must be placed in the "ChimeFiles" directory when using the commands in this schedule.
The downloaded schedule (dec25.sch) must be placed in the "Dec" directory to allow this schedule to run on December 25.

Schedule Description:

* There are no time scheduling commands inserted in this schedule. All the commands shown, are used for the remote control only. This remote schedule was used for a Christmas event.

* Use the following remote buttons to play the song shown below:

Button 1 = Angels On High
Button 2 = Away In The Manger
Button 3 = Bells Of St. Marys
Button 4 = Come All Ye Faithfull
Button 5 = Do You Hear What I...
Button 6 = Drummer Boy
Button 7 = Hark The Hearld
Button 8 = Oh Holy Night
Button 9 = Joy To The World
Button 10 = It Came Upon Mid...
Button 11 = Noel
Button 12 = Oh Holy Night
Button 13 = Silent Night
Button 14 = Silver Bells
Button 15 = We Three Kings
Button 16 = What Child Is This
Button 17 = Bell Peal1
Button 18 = Bell Peal2
Button 19 = Bell Peal3
Button 20 = Call To Worship1
Button 21 = Call To Worship2
Button 22 = Call To Worship3
Button 23 = Change Ringing Bells1
Button 24 = Change Ringing Bells2

Note:
All audio files for this schedule must be placed in the "RemoteSoundFiles" directory.
This schedule may be autoloaded with the remote by placing the mode switch in the "Chimes" position and pressing the 2 button to load Sched2. The mode switch should be returned to the remote position before using.
Copyright © 2004 American MicroTech Inc.
All rights reserved

Schedule Description: * System is activated from 9:00 AM to 6:15 PM. * Westminster chime at the top of each hour until deactivated. * Bell strikes multiple times at the top of each hour to announce the time. * Play two randomly selected carillons at 12:00 noon and 6:00 PM. * Assign bell and carillon tunes to each key (1-12) on the remote control for various church activities: Button# 1 = Call To Worship1 Button# 2 = Call To Worship2 Button# 3 = Call To Worship3 Button# 4 = Bell Peal1 Button# 5 = Bell Peal2 Button# 6 = Bugel Taps1 Button# 7 = Bugel Taps2 Button# 8 = Funeral Toll Button# 9 = Bell Change Ringing Button# 10 = Wedding Song1 Button# 11 = Wedding Song2 Button# 12 = Wedding Song3 Note: This schedule will run every day unless a weekday or month/day schedule is found.	Schedule Description: * System is activate from 9:00 AM to 10:00 AM. * At 9:00 AM, a call to worship bell will ring for several minutes. The system will be silent for the remaining day. * This schedule will run every sunday. Note: The call to worship may be activated by pressing key 1, 2 or 3 on the remote control. This is possible because the first 12 keys of the remote have been assigned various bell and carillon sounds. This remote setup is the same as "sched1.sch".
Schedule Description: * System is activated at 12:00 noon. * Westminster chime at 12:00 noon. * Bell strikes 12 times to announce time. * Play two randomly selected carillons at 12:00 noon. * System is disabled after completing the above commands. * System is activated again at 6:00 PM. * Westminster chime at 6:00 PM. * Bell strikes 6 times to announce time. * Play two randomly selected carillons at 6:00 PM. * System is disabled for the remaining evening. * This schedule will run every monday.	Schedule Description: * System is activate from 9:00 AM to 7:00 PM. * Westminster chime every hour until disabled. * A bell strike will announce the time every hour. * Two carillons will be randomly selected from the system hard drive and played at 12:00 noon. * At 6:00 PM, two consecutive tracks will be randomly selected from the systems compact disk and played. Note: A CD must be placed in the CD player before using this schedule. This schedule will run every tuesday. By substituting CD's, this schedule may be used for various holiday carillons or other music.
Schedule Description: * System is active from 12:00 noon to 07:00 PM. * At 12:00 noon, Hallelujah carillon will play. * After the carillon, a peal of bells will ring for 5 minutes at 12:00 noon. * At 06:00 PM, Joy To The World carillon will play. * The system will be disabled and quiet for the remaining evening after 07:00 PM. Note: All audio files (Hallelujah, JoyToWorld and Peal2_5Min) must be placed in the "ChimeFiles" directory when using the commands in this schedule. The downloaded schedule (dec25.sch) must be placed in the "Dec" directory to allow this schedule to run on December 25.	Schedule Description: * There are no time scheduling commands inserted in this schedule. All the commands shown, are used for the remote control only. This remote schedule was used for a Christmas event. * Use the following remote buttons to play the song shown below: Button 1 = Angels On High Button 2 = Away In The Manger Button 3 = Bells Of St. Marys Button 4 = Come All Ye Faithfull Button 5 = Do You Hear What I... Button 6 = Drummer Boy Button 7 = Hark The Hearld Button 8 = Oh Holy Night Button 9 = Joy To The World Button 10 = It Came Upon Mid... Button 11 = Noel Button 12 = Oh Holy Night Button 13 = Silent Night Button 14 = Silver Bells Button 15 = We Three Kings Button 16 = What Child Is This Button 17 = Bell Peal1 Button 18 = Bell Peal2 Button 19 = Bell Peal3 Button 20 = Call To Worship1 Button 21 = Call To Worship2 Button 22 = Call To Worship3 Button 23 = Change Ringing Bells1 Button 24 = Change Ringing Bells2 Note: All audio files for this schedule must be placed in the "RemoteSoundFiles" directory. This schedule may be autoloaded with the remote by placing the mode switch in the "Chimes" position and pressing the 2 button to load Sched2. The mode switch should be returned to the remote position before using.